97 K3500 Non Air Bag Steering Wheel Install.

[wirlybird]

I am putting the original wheel back on my K3500 truck.
I did not remove it so need some help.
Mainly for the horn wires but also the steering locking and anything else I might eb missing!
All the videos I find are for air bag models.

Any pictures or videos would be great! Thanks.

 

[wirlybird]

Ok, so if anyone is interested I figured out a solution.
Main thing was were does the ground go. Only thing I could see was to push that odd clip into one of the holes near the main lock nut.
Seemed to me that this could come loose or have intermittent contact, probably would be fine but - who likes a horn that gets stuck or doesn't work!
I added a jumper to ensure a good ground. Simple enough I guess.

You must be registered for see images attach

 

[98chevy2500SS]

Those positive wire horn clips get broken very easily, which could’ve been the case with yours. Glad you found a fix for it.

 

[wirlybird]

Those positive wire horn clips get broken very easily, which could’ve been the case with yours. Glad you found a fix for it.

Red wire was ok. It was the ground that had an odd terminal. I've seen them before but didn't see an obvious place to clip it. It did fit into one of the holes near the lock nut so I used that then added the jumper to make sure the ground was good. Works!