You must be registered for see images attach
You must be registered for see images attach
(I edited your earlier picture... the OT from the Y-tube is at the top, OT from the condenser is on the bottom)
Those OT screens... ugh. It's a sorry sight when there's $h!t like that in the system.
It looks like the filter screen in the condenser OT collapsed, and I assume leaked, which would explain why the OT in the Y-tube caught some crud.
I also assume the rear TXV screen received as much crud as the Y-pipe OT's screen
I also wonder what your (soon to be "former") receiver / drier looks like on the inside. I've cut them open before just to see what, if anything, took up residence in the bottom of the can.
On your system... I see two suction lines which join just prior to the compressor. I assume your front system has the R/D in its suction line, yes(?), while the rear system's suction line has none.
I ask b/c on the 1996+ system (such as mine) the R/D has three fittings, one for the front evaporator discharge, one for the rear suction line, and the third which feeds a single line to the compressor.