Summit 8802 cam 5.7 vortec

L31MaxExpress said:

It will sound more or less like a LT4 Hotcam.

Click to expand...

Erik the Awful said:

All around that's slightly bigger than my Lunati cam. Plenty of torque and it sounds absolutely badass with a good exhaust. I'm running LS2 beehives on Comp Cams 787-16 retainers. You'll need headers. If you're going to put in screw in studs, you might as well do a good cleanup port on the heads while they're off.

Click to expand...

grantclark1990 said:

Hey guys! I was curious to see who all has done the summit 8802 cam in the L31 Vortec like whats in my Yukon. It’s what I’ve decided to go with. I’d also like to do springs, ls7 lifters, screw in studs and some new 1.5 roller rockers, possibly 1.6. Anyway I was curious to see if there’s any sound clips floating around on how that summit cam sounds in one of these 350s. I’d be running long tubes and true duals through some straight through magnaflow as well, as well as deleting the cats while I’m at it.

Also would a simple retune of the stock pcm from blackbear be sufficient? That’s who I’m currently tuned by and happy with but I’ve heard about the 0411 swap as well, but boy oh boy there seems to be a lot that goes into that!

SO, looking for some sound clips, and some opinions on tuning and head work. Thanks gang!

Click to expand...

Tahoeproject said:

Hello, new to site just wondering if you got the 8802 up and going with tune? I just ordered the same cam and curious on tune.
Thanks

Click to expand...