-
-
Yup. Buy the AC Delco cable and you should be good to go. -
Ok, that's good - no issues internal to the transmission...So, when shifting gears using your column shifter, you should have the...
-
Who makes the cable?
-
Devn replied to the thread Cannot Manually Select 1st Gear.Shee-mar it’s the cheapest one you can buy on Rock Auto. I think I may have found out why it was cheap I suppose.
-
Devn replied to the thread Cannot Manually Select 1st Gear.At this point I’m not wondering if I got a defective cable that somehow got stretched or messed up in someway before I received it...
-
When you say you cannot select first gear, are you referring to manual low, which is "1" on the in-dash range position indicator? Are...
-
Devn replied to the thread Cannot Manually Select 1st Gear.Yes I am referring to manual low. I believe I bought the right cable I could only find listings for 118 Inches. The install seemed...
-
Devn replied to the thread Cannot Manually Select 1st Gear.What I find annoying is before my original went bad I had all the gears. But after I replaced it this problem happened. Another oddity...
-
I had the same thing on my 97 k2500 Suburban, I had to bend cable mounting at the transmission. Mines a 4l80e so I am not sure if its...
-
Hey all I have a 1997 K1500 Ext. cab. My shifter cable rusted out under the carpet a few day’s ago. I finally got around to replacing it...
-
Not sure if it’s the northeast salt and potholes, but I didn’t get good results with P15? Rust prevention in the northeast is just as...
-
If that's the only spot, all good it can be easily patched up. Might could hit the rest of it with a wire wheel and do a POR-15 job on...
-
Devn replied to the thread Frame Rust.Awesome I love to hear that! I was planning on doing some sort of undercoating before winter hit. Thanks for the POR-15 recommendation...
-
You can get new hangers. Cut out all the bad, weld in new, fishplate, then install new hangers. Only IF it is possible in that spot...
-
Devn replied to the thread Frame Rust.Ok at least I can tell myself there is a little hope. I checked the rest of the truck specifically at the bends and where the steering...
-
-
Loading…
-
Loading…
Members online
- frederik
- turbojamie
- 94 Sub
- Dravec
- Raknapa
- Additivewalnut
- noom14921992
- bluex
- Carlosthehandyman
- South VA
- lonehead
- antonio423
- Carlosm86
- janitorMike
- dave_erald
- Cadillacmak
- BuiltToWork
- Badcraig
- heartburn
- tim46800
- GMT430
- Road Trip
- Vwmercer98
- Skinns1234
- Charlesteneows
- fancyTBI
- johnckhall
- Drunkcanuk
- Miahjoe
- PlayingWithTBI
- Ozzy4194
- lj502
- 97GMCC2500SLE
- ynot5903
- tardisguy
- Striker1423
- Carlaisle
- El Tigre
- 1 slow 84 chevy
- Tim W
- _W1N_
- Ckt93
- RonSoCal
- Hammersmith
- Sle-z_90
- klzeturbo8
- mxkinn01
- 92yukon
- npme99
- Ebrogan05