This is a question about front wheel options the lack of (Lifted) wheel fitment knowledge on my side brings me to this point.
I’m pretty aware any 33” clears with some particular trim on a 2wd spindle lift I’ve one done it …
Talking 20s Can anyone confirm in the (Front) a 20x9 or 20x10 +18 offset 5.71” back spacing will clear with 33x12.50s with all the normal lower bumper trim and lower fender trimming on a 88-98 2WD
Wether it’s 4” or 6” front lift
I just did 17x9 Motos with 33x12.50 on my 97’ last year with only a 4” spindle lift the wheels at that time were “0” offset and everything was good 33s cleared with the minor trim on control arms and bumper corner . I’m only finding and looking at
Moto metal 20s which don’t seem to have a 0 offset option in a 20” rim. I just wanna make sure wether I need a -18 -24 or a +18 offset
Wider and further wheel sticks out the more it’s gonna hit the fender and bumper corners but I was only touching a smidge with a 4” lift having that extra 2” on a coil spring should make a huge difference
The pic below is the 17x9s 33s with 0 offset I did on my 97” previously.
So it’s the same suspension I’m dealing with but trying to figure out a good offset for a 20x9 -20x10 Even if I have to do a 31x12.50
I’m pretty aware any 33” clears with some particular trim on a 2wd spindle lift I’ve one done it …
Talking 20s Can anyone confirm in the (Front) a 20x9 or 20x10 +18 offset 5.71” back spacing will clear with 33x12.50s with all the normal lower bumper trim and lower fender trimming on a 88-98 2WD
Wether it’s 4” or 6” front lift
I just did 17x9 Motos with 33x12.50 on my 97’ last year with only a 4” spindle lift the wheels at that time were “0” offset and everything was good 33s cleared with the minor trim on control arms and bumper corner . I’m only finding and looking at
Moto metal 20s which don’t seem to have a 0 offset option in a 20” rim. I just wanna make sure wether I need a -18 -24 or a +18 offset
Wider and further wheel sticks out the more it’s gonna hit the fender and bumper corners but I was only touching a smidge with a 4” lift having that extra 2” on a coil spring should make a huge difference
The pic below is the 17x9s 33s with 0 offset I did on my 97” previously.
So it’s the same suspension I’m dealing with but trying to figure out a good offset for a 20x9 -20x10 Even if I have to do a 31x12.50
Last edited: