Nick88's latest activity
-
Nick88 replied to the thread Code 32 with a high flow exhaust..Yes once I start rolling it immediately kicks back into closed loop. -
Nick88 replied to the thread Code 32 with a high flow exhaust..Forgot to update again yesterday, but I drove in field service mode with cutout shut. The fuel mixture was pretty much the exact same...
-
Nick88 replied to the thread Code 32 with a high flow exhaust..update- just took the parkway with cutout shut, much more peaceful quiet drive as everyone can probably imagine. More importantly I did...
-
Nick88 replied to the thread Code 32 with a high flow exhaust..interesting feedback about my o2. I originally thought it was getting too cold, but the under 4mph reason may be more realistic. I think...
-
Nick88 replied to the thread Code 32 with a high flow exhaust..Alright guys important update. I used field service mode and driving it was constantly perfect, equal between on and off flashes same...
-
Nick88 replied to the thread Code 32 with a high flow exhaust..I understand it now fully after seeing the video and your graph. I’m very curious to see later how my motor is running while driving...
-
Nick88 replied to the thread Code 32 with a high flow exhaust..I’ve used the field service mode to track going into closed loop, I know it can be used to read fuel mixture, but I never knew how, so I...
-
Nick88 replied to the thread Code 32 with a high flow exhaust..I will probably end up doing the conversion, I’m just on a tight budget right now, so I’m gonna hold off for a bit, is there any benefit...
-
Nick88 replied to the thread Code 32 with a high flow exhaust..Cut off the old catalytic converter when I bought the truck, I ran the truck without EGR a few times after shooting carb cleaner in the...
-
Sounds like a good plan. Testing the EGR valve's ability as installed to directly impact the engine operation and letting the results...
-
Nick88 replied to the thread Code 32 with a high flow exhaust..It is still the single wire, but if I jump AB on the obd1 port it shows that it does in fact go into closed loop. I kept the restrictive...
-
Nick88 replied to the thread Code 32 with a high flow exhaust..Very very helpful, later I will test at idle moving diaphragm to see if it is the exhaust passages clogged to hell. I have a cutout so I...
-
Nick88 replied to the thread Code 32 with a high flow exhaust..I’m not too worried about more mpg, I just don’t want a SES to cause a drop in it. When going around 60mph in OD with 3.73 and 33s I can...
-
Nick88 replied to the thread Code 32 with a high flow exhaust..Do you know if code 32 would cause “limp mode” I don’t mind driving it around for a bit with an on and off SES before I pop the intake...
-
Nick88 replied to the thread Code 32 with a high flow exhaust..Do you think it’s possible even though it obviously won’t be nearly as thorough, I could pop off the egr and spray a ton of carb cleaner...
Staff online
-
df2x44L60E Destroyer -
kennythewelderOfficially Retired, B31-3 (6-G) certified welder.
Members online
- cabincreeker54
- Gills
- 520K2500
- david97z71
- Hanabc53
- Schurkey
- gblotter
- pgutier1
- Austin9372
- skylark
- Mig11
- Club_Sierra
- Gravyyy
- ShtBoxOwnr
- Road Trip
- WojTec
- 99xcss4
- Badmax
- WAM62
- 98tahoe4dr
- SNCTMPL
- Hardware_Hank
- Zack8
- JPVortex
- 94mexistepside
- hekg
- L31MaxExpress
- mhau93obs
- TheRedWoods6
- df2x4
- Komet
- jeepguy
- Southside21047
- tpass
- jd33173
- Vanishing Point
- movietvet
- caw_86
- Elderauto74
- PS2it
- 54Crew
- Sthtx Nick
- Jakpollock
- Alteca
- nate08kella
- bassentx
- kennythewelder
- El Tigre
- calebmichael
- Amaceda